Hardware Specifications - Nexcom 912P User Manual

Chapter 1: Product Introduction

Hardware Specifications

CPU Support
▪ Socket LGA1151, Intel
6th and next generation Core™ i7/i5/i3 processor
®
and Intel ® Celeron ® processors
Main Memory
▪ 4x 288-pin dual channel long DIMMs support DDR4 2133/1867MH up to
64GB, non-ECC, un-buffered system memory
Chipset
▪ Intel
® Q170 PCH
BIOS
▪ AMI system BIOS
▪ Plug and play support
On-board LAN
▪ 2x RJ45 connectors with LED
▪ LAN1: Intel
PHY I219LM GbE LAN (support AMT 11.0)
®
▪ LAN2: Intel
® I210AT GbE LAN
▪ Support PXE boot from LAN, wake on LAN function
Display
▪ 2x HDMI 1.4 connector (resolution up to 4096 x 2160@24Hz)
▪ 1x VGA (resolution up to 1920 x 1200@60Hz)
Expansion Slot
▪ 1x PCIe x16 (gen. 3.0)
▪ 2x PCIe x4
▪ 4x PCI
Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
Edge I/O Interfaces
▪ 2x HDMI
▪ 1x VGA
▪ 2x RJ45 connectors with GbE transformer inside & LED
▪ 10x USB 3.0 (blue)
▪ 1x RS-232/422/485 DB-9 connector (COM1)
▪ 1x Combo PS/2 KB and MS
▪ 1x Audio Jack: Line-in/Line-out/Mic-in
I/O Interfaces
▪ USB 2.0: 4 ports by internal pin-header
▪ Serial: 5 ports RS232 by internal pin-header
▪ SATA HDD: 4 ports SATA6.0Gb/s, supports RAID 0/1/5/10
▪ GPIO: supports 4x GPI and 4x GPO
Interfaces
▪ 1x Pin header for TPM
▪ 1x 4-pin CPU fan connector; 2x 4-pin chassis fan connector
▪ 1x Front panel header; 1x clear CMOS jumper
▪ 1x Chassis Intrusion
▪ 1x Speaker header (Line-out)
System Monitor
▪ 4 voltage (for +3.3V/+5V, +12V, Vcore)
▪ 2 temperatures (CPU, system temperatures)
▪ 2 fans speed (CPU and system fans)
2
NEX 912P User Manual