Hardware Specifications - Nexcom NEX 614 User Manual

Chapter 1: Product Introduction

Hardware Specifications

CPU Support
▪ Socket LGA1151, Intel
6th and next generation Core™ i7/i5/i3 processor
®
and Intel ® Celeron ® processors, 14nm process
Main Memory
▪ Dual DDR4/SO-DIMMs, up to 32GB
Chipset
▪ Intel
H110 PCH
®
▪ Intel
® Q170 PCH as optional
BIOS
▪ AMI system BIOS
▪ Plug and play support
On-board LAN
▪ 2x RJ45 connectors with Intel
®
▪ Support PXE boot from LAN, wake on LAN function
Display
▪ 1x HDMI 1.4 connector (resolution up to 4K/2K@30Hz)
▪ 1x DP 1.2 connector (resolution up to 4096x2304)
▪ 1x VGA (resolution up to 1920x1200)
▪ 1x LVDS (support dual port 24-bit)
Expansion Slot
▪ 1x mini-PCI express slot support mSATA, Wi-Fi module and 3G module
built with card holder
Copyright © 2016 NEXCOM International Co., Ltd. All Rights Reserved.
I219LM and i211-AT GbE controller
I/O Interface
▪ COM1/3/4: RS232, 9-pin wafer with cable JST connector
▪ COM2: RS232/422/485, 1x DB9 male connector on edge I/O
▪ USB 2.0/3.0: 7 ports
– USB 3.0 x 4 ports edge connector
– USB 2.0 x 3 ports by 2.54mm pin connector
▪ 4-in/4-out GPIO
▪ 2x 7-pin header with PWR button/reset button/PWR LED/HDD LED
▪ 1x 4-pin fan connector support PWM fan
▪ 1x 3-pin system fan
Storage
▪ 3x 7-pin SATA 6Gb/s connector; one supports SATA-DOM
▪ 4th SATA connector reserved for Q170 as optional to support RAID 0/1/5
▪ 2x 4-pin connector for SATA power
Audio
▪ Realtek ALC886 HD codec
Power Requirements
▪ AT/ATX mode (by jumper setting default-AT)
▪ 4-pin power connector (right angle) for DC power input
▪ +12V~24V DC input (with ±5%)
Optional Function
▪ TPM module (EBK-TPM)
2
NEX 614 User Manual