11 Service Work On The Chassis; Raising The Motorcycle With A Lift Stand; Removing The Motorcycle From The Lift Stand - Husqvarna FC 450 2020 Owner's Manual

11 SERVICE WORK ON THE CHASSIS

11.1
Note
Material damage The vehicle may be damaged by incorrect procedure when parking.
Significant damage may be caused if the vehicle rolls away or falls over.
The components for parking the vehicle are designed only for the weight of the vehicle.
–
Park the vehicle on a firm and level surface.
–
Ensure that nobody sits on the vehicle when the vehicle is parked on a stand.
11.2
Note
Material damage The vehicle may be damaged by incorrect procedure when parking.
Significant damage may be caused if the vehicle rolls away or falls over.
The components for parking the vehicle are designed only for the weight of the vehicle.
–
Park the vehicle on a firm and level surface.
–
Ensure that nobody sits on the vehicle when the vehicle is parked on a stand.
52

Raising the motorcycle with a lift stand

401942-01

Removing the motorcycle from the lift stand

H02629-10
(FC 450)
–
Remove the plug-in stand and lift up the motorcycle by
the frame underneath the engine.
Lift stand (81329955100)
Neither wheel is in contact with the ground.
(ROCKSTAR EDITION)
–
Remove the plug-in stand and lift up the motorcycle by
the motor guard underneath the engine.
Lift stand (81329955100)
Neither wheel is in contact with the ground.
(FX 450)
–
Fold in the side stand and raise the motorcycle at the
frame underneath the engine.
Lift stand (81329955100)
Neither wheel is in contact with the ground.
–
Secure the motorcycle against falling over.
(All FC models)
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, insert plug-in stand
left side of the wheel spindle.
Plug-in stand (79029094000)
Info
The plug-in stand is included.
Remove the plug-in stand before riding.
1
into the