Service Work On The Chassis 12; Raising The Motorcycle With A Lift Stand; Removing The Motorcycle From The Lift Stand; Bleeding The Fork Legs - Husqvarna FE 450 EU 2020 Owner's Manual

12.1

Raising the motorcycle with a lift stand

12.2

Removing the motorcycle from the lift stand

Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
12.3

Bleeding the fork legs

SERVICE WORK ON THE CHASSIS 12

Note
Danger of damage The parked vehicle can roll away or fall
over.
–
Park the vehicle on a firm and level surface.
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (81329955100)
Neither wheel is in contact with the ground.
401942-01
–
Secure the motorcycle against falling over.
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press side stand
with your foot and lean the motorcycle on it.
Info
When you are riding, the side stand must be folded up
and secured with rubber strap.
401943-10
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Release bleeder screws
Any excess pressure escapes from the interior of the
fork.
–
Tighten the bleeder screws.
402556-10
Finishing work
–
Remove the motorcycle from the lift stand. (
1
to the ground
p. 55)
1
.
p. 55)
55