Table of Contents
Advertisement
MoRoS ADSL 2.1 PRO
2.
Turn the flat-blade screwdriver into the direction of the device as
shown in the following figure.
The plastic spring of the snap-in hook is stretched.
3.
While you hold the plastic spring apart with the lower snap-in hooks,
pull the device away from the DIN rail.
4.
Un-hook the device and take it off perpendicularly to the DIN rail.
The MoRoS ADSL 2.1 PRO is now removed.
Assembly
37
Advertisement
Table of Contents
Need help?
Do you have a question about the MoRoS ADSL 2.1 PRO and is the answer not in the manual?