INSYS MoRoS ADSL 2.1 PRO Manual page 103

MoRoS ADSL 2.1 PRO
4. Confirm the query with Yes .

The update process starts. The browser waits. During the update, the
Status/VPN LED lights up red.

After the completed update, a page is displayed which confirms the
successful update procedure. Do not perform any action at the web
interface until this page is displayed.
5. If you have also received the file "data_<rev>", proceed with the
second file "data_<rev>" as with the first file, without performing a
restart. Repeat the step
following the upload.
6. If you have only received the file "system_<rev>", change in the
"System" menu to the "Reset" page, select "Reset" and click on OK .

The new firmware is now active.
s from step 1. An automatic restart takes place
Note
Disabling the sandbox!
If a firmware update is performed, a possibly running
sandbox will be disabled before.
Observe for your application that a running sandb
disabled, if a firmware update will be performed.
Functions
ox will be
103