Audio Decode Configuration Command - Cisco D9800 Reference Manual

Decode Configuration Commands
The full CC settings table is the same as just retrieving it with the prefccmode argument as the prefccmode
Note
argument is the only argument of CC.

Audio Decode Configuration Command

Note The audio decode configuration command is only supported in Version 1.x to 2.05.
Table 177: Command Details
Command Detail
Command URL
Command Information
HTTP Methods
Access Type
Access Level
GET Syntax
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
212
Description
https://192.168.0.1/ws/v2/service_cfg/decode/audio
Allows set or get of audio decode settings parameters.
GET, POST
Read, Write
User, Admin
One of the following:
GET "https://192.168.0.1/ws/v2/service_cfg/decode/audio",
GET
"https://192.168.0.1/ws/v2/service_cfg/decode/audio?device=[device#]
&mode&ac3comp&left&right&
pmtsrc&ddpmode&langmenu&lang", or
GET "https://192.168.0.1/ws/v2/service_cfg/decode/audio?
device=all"
This option is available in Version 2.75 or
Note
later.
This command format is currently equivalent to specifying the GET
operation for service_cfg/device/audio without any Query arguments. It
will return the complete data for all Audio device instances. Other filter
parameters will currently be ignored when specified along with the GET
device=all key for this command.
API Definitions