Cisco D9800 Reference Manual page 158

Input Configuration Command
Note
Table 137: URI Query/Set Arguments (possible fields and values preceded by ? and separated by &)
URI Argument
port (Key)
stream (Key)
(optional)
This is not applicable to Version 1.x
act
acqmode
netid
freqmode
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
146
All of the URI Arguments below apply to both GET and POST. For GET, the URI arguments do not
need any values, except the port which must be specified. For POST the port must be specified
followed by any of the below URI arguments and the associated value the user would like to set.
In-depth CURL examples can be seen below following the table.
Description
Input Port to be configured
Type: Integer
Value: 2
This does not refer to the NTC Ethernet ports, it refers
Note
specifically to the ASI ports
Multi Input Stream ID. If not specified, default value of 1 is used.
Type: Integer
Value: 2
Activate Input
Type: String
Values: "Yes" or "No"
PSI Acquisition Mode
Type: String
Values: "Auto", "Basic", "Custom"
Network Identifier
Type: Integer
Values: 0 ... 65535
Frequency Tuning Mode
Type: String
Values: "NIT", "User Cfg"
API Definitions