Abr Input Configuration Command - Cisco D9800 Reference Manual

ABR Input Configuration Command

ABR Input Configuration Command
Table 145: Command Details
Command Detail
Command URL
Command Information
HTTP Method(s)
Access Type
Access Level
Syntax
POST Syntax
URI Parameters (extension to the Command URL separated by /): N/A
Note
Note
Table 146: URI Query/Set Arguments (possible fields and values preceded by ? and separated by &):
URI Argument
stream (Key)
act
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
162
Setting Parameters using command line arguments are limited to maximum of 26 arguments after
the ?.
All of the URI Arguments in the table apply to both GET and POST. For GET, the URI arguments
do not need any values, except the stream which must be specified. For POST the stream must be
specified followed by any of the below URI arguments and the associated value the user would like
to set. In-depth CURL examples can be seen below following the table.
Description
https://192.168.0.1/ws/v2/service_cfg/input/abr
Allows ABR input settings to be read or configured.
GET, POST
Read/Write (with complex input data)
User, Admin
GET "https://192.168.0.1/ws/v2/service_cfg/input/abr", or
GET "https://192.168.0.1/ws/v2/service_cfg/input/abr?
stream=[stream#]"
POST "https://192.168.0.1/ws/v2/service_cfg/input/abr?
stream=[stream#]&cmdrow=Add..."
Description
Multi Input Stream ID
Type: Integer
Values: 1..32
Activate Input
Type: String
Values: "Yes" or "No"
API Definitions