Video Decode Configuration Command - Cisco D9800 Reference Manual

Decode Configuration Commands

Video Decode Configuration Command

Table 169: Command Details
Command Detail
Command URL
Command Information
HTTP Methods
Access Type
Access Level
GET Syntax
POST Syntax
Setting Parameters using
command line arguments is
limited to maximum of 26
arguments after the ?.
URI Parameters (extension to the Command URL separated by /): N/A
URI Query/Set Arguments (possible fields and values preceded by ? and separated by &):
For GET, the URI arguments below will not contain values. For POST, the arguments below will need to
Note
be specified with a value. In-depth CURL examples can be seen below
Trisync is not supported in the current release. It may still be accepted as an input Query/Set Argument
Note
and shown in the output return body data in software Version 2.27 or below. The client software should
ignore and not use or display this field.
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
204
Description
https://192.168.0.1/ws/v2/service_cfg/decode/video
Allows set or get of video decode settings parameters.
GET, POST
Read, Write
User, Admin
One of the following:
GET "https://192.168.0.1/ws/v2/service_cfg/decode/video", or
GET "https://192.168.0.1/ws/v2/service_cfg/decode/video? pvformat"
POST
"https://192.168.0.1/ws/v2/service_cfg/decode/video?pvformat=[value]&sdformat=[value]"
API Definitions