Disaster Recovery (D/R) Backup Channels Configuration Command - Cisco D9800 Reference Manual

API Definitions
}

Disaster Recovery (D/R) Backup Channels Configuration Command

Table 219: Command Details
Command Detail
Command URL
Command Information
HTTP Methods
Access Type
Access Level
GET Syntax
POST Syntax
Setting Parameters using
command line arguments is
limited to maximum of 26
arguments after the ?.
URI Parameters (extension to the Command URL separated by /): N/A
Note
"rowstatus": "Inactive"
},
{
"csirec": "3",
"fec": "Auto",
"dnlkfreq": "3.449",
"input": "RF1",
"mod": "DVB-S",
"netid": "1",
"symrate": "28.3465",
"rolloff": ".35",
"rowstatus": "Inactive"
}
]
Description
https://192.168.0.1/ws/v2/service_cfg/dr/channels
Allows set or get of D/R backup channel configuration.
GET, POST
Read, Write
User, Admin
All D/R backup channels Settings
GET "https://192.168.0.1/ws/v2/service_cfg/dr/channels"
Single D/R backup channels Setting
GET
"https://192.168.0.1/ws/v2/service_cfg/dr/channels?peid=PE1&csirec=1&
bkpchan"
POST, for example,
"https://192.168.0.1/ws/v2/service_cfg/dr/channels?peid=PE1&csirec=1&bkpchan=201"
For POST, the value for the argument seen below must be specified, but for GET, there are no values
for arguments.
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
Disaster Recovery (D/R) Configuration API
263