Hd Transcode Configuration Command - Cisco D9800 Reference Manual

API Definitions

HD Transcode Configuration Command

Table 207: Command Details
Command Detail
Command URL
Command Information
HTTP Methods
Access Type
Access Level
GET Syntax
POST Syntax
Setting parameters using
command line arguments is
limited to maximum of 26
arguments after the ?.
URI Parameters (extension to the Command URL separated by /): N/A
Note
Table 208: URI Query/Set Arguments (possible fields and values preceded by ? and separated by &)
URI Argument
index (Key)
vres
Description
https://192.168.0.1/ws/v2/service_cfg/transcode/hd
Allows set or get of HD transcode configuration.
GET, POST
Read, Write
User, Admin
All HD transcode Settings:
GET "https://192.168.0.1/ws/v2/service_cfg/transcode/hd"
Single HD transcode Setting:
GET "https://192.168.0.1/ws/v2/service_cfg/transcode/hd?vres"
POST "https://192.168.0.1/ws/v2/service_cfg/transcode/hd? vres=Auto"
All of the URI Arguments in the table below apply to both GET and POST. For GET, the URI
arguments do not need any values, except the index which must be specified. For POST, the index
must be specified followed by any of the below URI arguments and the associated value the user
would like to set. In-depth CURL examples can be seen below following the table.
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
Description
Transcoder to be configured
Type: Integer
Values: 1..N (number of transcoders depends on model and installed
options)
Select the video format of the transcoded output
Type: String
Values: "Auto", "HD Output", "SD Output"
Transcoding Configuration Commands
245