Cisco D9800 Reference Manual page 165

API Definitions
URI Argument
sdten
paten
dejlat
ipiport
redenb
reddir
reddel
redrev
cmdrow
Output Fields:
Output fields returned in GET results are the same names used for the possible arguments for this command.
POST Examples:
Description
Enable SDT reception.
Type: String
Values: "Yes", "No"
Enable PAT reception.
Type: String
Values: "Yes", "No"
Dejitter Buffer Latency
Type: Integer
Values: 40 ... 150
IPI Port
Type: String
Values: "Data1", "Data2", "Data3", "Data4"
nput Redundancy Mode
Type: String
Values: "Yes", "No"
IPI Redundancy Switch Over Direction
Type: String
Values: "Non-Revertive", "Revertive"
Direct Redundancy Switch Over Delay in milliseconds
Type: Integer
Values: 0 ... 10000
Revertive Redundancy Switch Over Delay in seconds
Type: Integer
Values: 0 ... 30
Add or Delete an instance of IP Input
Type: String
Values: "Add" (R/W), "Delete" (R/W), "Active" (RO), "Inactive" (RO)
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
Input Configuration Command
153