Cisco D9800 Reference Manual page 250

CA (Conditonal Access) Configuration Commands
Command Detail
GET Syntax
POST Syntax
Setting parameters using
command line arguments is
limited to maximum of 26
arguments after the ?.
Note
Table 202: URI Query/Set Arguments (possible fields and values preceded by ? and separated by &)
URI Argument
sendquery
autoreset
listmgmt
tsonetchk
tsid
onetid
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
238
Description
All CI CAM Settings:
GET "https://192.168.0.1/ws/v2/service_cfg/ca/ci"
Single CI CAM Setting:
GET "https://192.168.0.1/ws/v2/service_cfg/ca/ci?sengdquery"
POST "https://192.168.0.1/ws/v2/service_cfg/ca/ci? sendquery=Enable"
These arguments are intended to be used with POST. When this command is used as a GET command
these arguments generally serve as output field descriptions
Description
Send Query to CAM before enabling descrambling
Type: String
Value: "Enable", "Disable"
Auto Reset CAM on failure
Type: String
Value: "Enable", "Disable"
CA PMT List management mechanism
Type: String
Value: AddDel, UpdateAll
Transport ID/ Original Network ID check
Type: String
Value: "Enable", "Disable"
Transport ID
Type: Integer
Value: 0..65535
Original Network Identifier
Type: Integer
Value: 0..65535
API Definitions