Cisco D9800 Reference Manual page 202

Output Configuration Command
URI Argument
insertnul
mcastip
destport
fecscheme
tpperframe
redunmode
redundir
redundelfwd
redundelbck
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
190
Description
Insert Null Packet
Type: String
Values: "Yes", "No"
insertnul="No" is not allowed with ratemode="User"
Set valid SAP destination IP address (multicast only)
Type: String
Value: IP address in dot format, for example, 224.2.127.254
Set the SAP UDP destination port number
Type: Integer
Value: 1024..65534
FEC arrangement : Block-aligned (0) or Non Block-aligned
Type: String
Values: "Block Aligned", "Non-Block Aligned"
Set the number of transport packets to be sent per IP packet
Type: Integer
Value: 1..7
Redundancy Mode
Type: String
Values: "Mirroring", "Backup: First Port", "Backup: Second Port", "Manual:
First Port", "Manual: Second Port"
Switchover direction
Type: String
Values: "Non-Revertive" or "Revertive"
Delay before switching from Main to Backup port, in ms
Type: Integer
Value: 0..10000
Delay before switching from Backup to Main port, in sec
Type: Integer
Value: 0..120
API Definitions