Cisco D9800 Reference Manual page 85

API Definitions
Command Detail
Access Type
Access Level
Syntax for getting MOIP status output
parameters
Syntax for getting ASI status output
parameters
Table 55: URI <level_1> URI Parameters (extension to the Command URL separated by /)
URI Level 1 Parameter
asi/asi1/as2
moip/moip1/moip2
Table 56: URI <level_2> URI Parameters (extension to the Command URL separated by /)
URI Level 2 Parameter
pid
Description
Read
User, Admin
GET "https://192.168.0.1/ws/v2/status/output/moip/pid",
GET "https://192.168.0.1/ws/v2/status/output/moip1/pid", or
GET "https://192.168.0.1/ws/v2/status/output/moip2/pid"
GET "https://192.168.0.1/ws/v2/status/output/asi/pid",
GET "https://192.168.0.1/ws/v2/status/output/asi1/pid", or
GET "https://192.168.0.1/ws/v2/status/output/asi2/pid"
Description
Output type is ASI.
On NTC Basic or NTC MOIP, the supported values are asi or asi2
for the unique asi output.
On NTC MS, the supported values are asi1 for bidirectional port
1 and asi2 for bidirectional port 2.
Output type is MOIP.
On NTC Basic, this call is not supported
On NTC MOIP, the supported values are moip or moip1 for the
unique IP output.
On NTC MS, the supported values are moip1 for IP output 1 and
moip2 for IP output 2.
Description
DPM PMT PID information.
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
Output Status Command
73