Cisco D9800 Reference Manual page 241

API Definitions
Command Detail
POST Syntax
Setting parameters using
command line arguments is
limited to maximum of 26
arguments after the ?.
URI Parameters (extension to the Command URL separated by /): N/A
Note
Table 192: Advanced Audio Control URI Query/Set Arguments (possible fields and values preceded by ? and separated
by &)
Advanced Audio Control URI Argument
enable
Table 193: HDMI Settings URI Query/Set Arguments (possible fields and values preceded by ? and separated by &)
HDMI Settings URI Argument
hdmiindex (key)
pair (key)
Description
Advanced Audio Control
POST "https://192.168.0.1/ws/v2/service_cfg/decode/
advaudio_control?enable=Yes"
HDMI Advanced Audio Settings
POST "https://192.168.0.1/ws/v2/service_cfg/decode/
advaudio_hdmi?hdmiindex=1&pair=1&slot=1&decoder=2&
chan=Downmix%20Right"
SDI Advanced Audio Settings
POST "https://192.168.0.1/ws/v2/service_cfg/decode/
advaudio_sdi?sdiindex=1&group=1&slot=1&
input=PCM%20Pair%201&chan=Right/Left"
All of the URI Arguments listed for HDMI Settings apply to both GET and POST. For GET, the
URI arguments do not need any values, except 'hdmiindex' which must be specified. For POST all
keys must be specified followed by any of the below non-key URI arguments and the associated
value the user would like to set. The GET result output field names re-use the argument names and
possible values.
Cisco D9800 Network Transport Receiver Version 2.75 RESTful Web Services API Reference Guide
Description
Advanced Audio Control
Type: String
Value: "Yes", "No"
Description
HDMI Device Instance
Type: Integer
Value: 1..2
PCM Pair
Type: Integer
Value: 1..4
Decode Configuration Commands
229