Terminal Plates - Siemens SENTRON Manual

Accessories

9.3 Terminal plates

9.3 Terminal plates
As well as the terminal covers, terminal plates can also be used to protect the terminals
against direct touch. The terminal plates are mounted on the front side to protect the upper
and lower connecting terminals.
Figure 9-5
For current ratings 250 A to 630 A, a terminal plate is required for the overall protection of
the top and bottom. For current ratings from 800 A, the terminal plates consist of 2 parts and
are included in the scope of supply.
The optionally available terminal plates are listed in the table below.
Current rating
250 A
400 A
630 A
800 A
1000 A
1250 A
1600 A
2000 A
2500 A
3200 A
150
Terminal plate
Number of poles
3 poles
4 poles
3 poles
4 poles
3 poles
4 poles
3 poles
4 poles
3 poles
4 poles
3 poles
4 poles
3 poles
4 poles
3 poles
4 poles
3 poles
4 poles
3 poles
4 poles
Position
Top, bottom
Manual, 08/2017, L1V30368969104A-02
Product number
3KC9827-1
3KC9828-1
3KC9827-1
3KC9828-1
3KC9827-2
3KC9828-2
3KC9827-3
3KC9827-7
3KC9827-3
3KC9827-7
3KC9827-3
3KC9827-7
3KC9827-4
3KC9827-8
3KC9827-5
3KC9828-5
3KC9827-5
3KC9828-5
3KC9827-5
3KC9828-5