Siemens SENTRON Manual page 166

Accessories
9.14 Display (3KC8 only)
Connecting the display
The 3KC9823-2 connection cable is required for connecting the display to the transfer
switching equipment (see also the section titled Connection cable (3KC8 only) (Page 167)).
1. Connect one end of the 3KC9823-2 connection cable with the connection socket on the
rear of the display.
Figure 9-30
2. Connect one end of the connection cable 3KC9823-2 with the connection socket on the
rear of the display.
Figure 9-31
166
Connecting the 3KC9823-2 connection cable on the display
Connecting the display on the transfer switching equipment
Manual, 08/2017, L1V30368969104A-02