KEB COMBIVERT F5 Series Instruction Manual page 23

Parameter description
Value Setting Function
4 CP.31
5
6
7
8
9
10
11
12...19
20
21
22
23
24
25
26
27 CP.32
28
29...30
31
32
33
34
35
36...39
40
41
42...46
47
48
49
50
51
52
53
54...62
63
64
65
66
67...69
70
71...72
73
74
75...79
80
81
82
83
84...100
1) Switching level of CP.31 = 100; The switching level of CP.32 is adjusted by CP.33.
Fault relay
Fault relay (not at under voltage error)
Warning or error message at abnormal stopping
Overload alert signal
Overtemperature alert signal power modules
External overtemperature alert signal motor
Only application mode
Overtemperature alert signal interior OHI
Only application mode
Actual value = set value (CP.3 = Fcon; rcon; not at noP, LS, error, SSF)
Accelerate (CP.3 = FAcc, rAcc, LAS)
Decelerate (CP.3 = FdEc, rdEc, LdS)
Real direction of rotation = set direction of rotation
Utilization > switching level 1)
Active current > switching level 1)
Only application mode
Real value (CP.1) > switching level 1)
Setpoint (CP.2) > switching level 1)
Only application mode
Absolute setpoint at AN1 > switching level 1)
Absolute setpoint at AN2 > switching level 1)
Only application mode
Setpoint at AN1 > switching level 1)
Setpoint at AN2 > switching level 1)
Only application mode
Hardware current limit activated
Modulation on-signal
Only application mode
Ramp output value > switching level 1)
Apparent current (CP.4) > switching level 1)
Forward running (not at nOP, LS, abnormal stopping or error)
Reverse running (not at nOP, LS, abnormal stopping or error)
Warning E.OL2
Current regulator limit reached
Speed regulator limit reached
Only application mode
Absolute value ANOUT1 > switching level 1)
Absolute value ANOUT2 > switching level 1)
ANOUT1 > switching level 1)
ANOUT2 > switching level 1)
Only application mode
Driving current active (safety relay)
Only application mode
Absolut active power > switching level 1)
Active power > switching level 1)
Only application mode
Active current > switching level 1)
Real value channel 1 > switching level 1)
Real value channel 2 > switching level 1)
HSP5 bus synchronized
Only application mode
GB - 23