Show Tacacs - Cisco NCS 5000 Series Manual

show tacacs

show tacacs
To display information about the TACACS+ servers that are configured in the system, use the show tacacs
command in the XR EXEC mode.
show tacacs
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
XR EXEC mode
Command History
Release
Release 6.0
Usage Guidelines
Use the show tacacs command to display statistics for each configured TACACS+ server.
Task ID
Task ID
aaa
Examples The following is sample output from the show tacacs command:
RP/0/RP0/CPU0:router# show tacacs
For IPv4 IP addresses:
Server:1.1.1.1/21212 opens=0 closes=0 aborts=0 errors=0
Server:2.2.2.2/21232 opens=0 closes=0 aborts=0 errors=0
For IPv6 IP addresses:
Server: 1.2.3.5/49
This table describes the significant fields shown in the display.
System Security Command Reference for Cisco NCS 5000 Series Routers
80
packets in=0 packets out=0
status=up single-connect=false
packets in=0 packets out=0
status=up single-connect=false
family = AF_INET opens=0 closes=0 aborts=0 errors=0
packets in=0 packets out=0
status=up single-connect=false
Authentication, Authorization, and Accounting Commands
Modification
This command was introduced.
Operations
read