Accounting (Line) - Cisco NCS 5000 Series Manual

Authentication, Authorization, and Accounting Commands

accounting (line)

To enable authentication, authorization, and accounting (AAA) accounting services for a specific line or group
of lines, use the accounting command. To disable AAA accounting services, use the no form of this command.
accounting {commands| exec} {default| list-name}
no accounting {commands| exec}
Syntax Description
commands
exec
default
list-name
Command Default
Accounting is disabled.
Command Modes
Line template configuration
Command History
Release
Release 6.0
Usage Guidelines
After you enable the aaa accounting command and define a named accounting method list (or use the default
method list) for a particular type of accounting, you must apply the defined lists to the appropriate lines for
accounting services to take place. Use the accounting command to apply the specified method lists to the
selected line or group of lines. If a method list is not specified this way, no accounting is applied to the selected
line or group of lines.
Task ID
Task ID
aaa
Enables accounting on the selected lines for all XR EXEC mode shell commands.
Enables accounting of XR EXEC mode session.
The name of the default method list, created with the aaa accounting command.
Specifies the name of a list of accounting methods to use. The list is created
with the aaa accounting command.
Operations
read, write
System Security Command Reference for Cisco NCS 5000 Series Routers
accounting (line)
Modification
This command was introduced.
23