Cisco NCS 5000 Series Manual page 22

aaa authorization (XR-VM)
• XR EXEC mode authorization—Applies authorization for starting an XR EXEC mode session.
• Network authorization—Applies authorization for network services, such as IKE.
• Event manager authorization—Applies an authorization method for authorizing an event manager
When you create a named method list, you are defining a particular list of authorization methods for the
indicated authorization type. When defined, method lists must be applied to specific lines or interfaces before
any of the defined methods are performed.
Task ID
Task ID
aaa
Examples The following example shows how to define the network authorization method list named listname1, which
specifies that TACACS+ authorization is used:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# aaa authorization commands listname1 group tacacs+
System Security Command Reference for Cisco NCS 5000 Series Routers
14
The exec keyword is no longer used to authorize the fault manager service. The
Note
eventmanager keyword (fault manager) is used to authorize the fault manager service.
The exec keyword is used for EXEC authorization.
(fault manager). You are allowed to use TACACS+ or locald.
Note The eventmanager keyword (fault manager) replaces the exec keyword to authorize
event managers (fault managers).
Authentication, Authorization, and Accounting Commands
Operations
read, write