Tacacs-Server Ipv4 - Cisco NCS 5000 Series Manual

tacacs-server ipv4

tacacs-server ipv4
To set the Differentiated Services Code Point (DSCP), which is represented by the first six bits in the Type
of Service (ToS) byte of the IP header, use the tacacs-server ipv4 command in XR Config mode.
tacacs-server ipv4 dscp dscp-value
Syntax Description
ipv4
dscp
dscp-value
System Security Command Reference for Cisco NCS 5000 Series Routers
96
Specifies the dscp bit for the IPv4 packets.
Sets the DSCP in the IP header.
Specifies the options for setting the value of DSCP. The available options are:
• <0-63> Differentiated services codepoint value
• af11 Match packets with AF11 dscp (001010)
• af12 Match packets with AF12 dscp (001100)
• af13 Match packets with AF13 dscp (001110)
• af21 Match packets with AF21 dscp (010010)
• af22 Match packets with AF22 dscp (010100)
• af23 Match packets with AF23 dscp (010110)
• af31 Match packets with AF31 dscp (011010)
• af32 Match packets with AF32 dscp (011100)
• af33 Match packets with AF33 dscp (011110)
• af41 Match packets with AF41 dscp (100010)
• af42 Match packets with AF42 dscp (100100)
• af43 Match packets with AF43 dscp (100110)
• cs1 Match packets with CS1(precedence 1) dscp (001000)
• cs2 Match packets with CS2(precedence 2) dscp (010000)
• cs3 Match packets with CS3(precedence 3) dscp (011000)
• cs4 Match packets with CS4(precedence 4) dscp (100000)
• cs5 Match packets with CS5(precedence 5) dscp (101000)
• cs6 Match packets with CS6(precedence 6) dscp (110000)
• cs7 Match packets with CS7(precedence 7) dscp (111000)
• default Match packets with default dscp (000000)
• ef Match packets with EF dscp (101110)
Authentication, Authorization, and Accounting Commands