Aaa Accounting System Default - Cisco NCS 5000 Series Manual

aaa accounting system default

aaa accounting system default
To enable authentication, authorization, and accounting (AAA) system accounting, use the aaa accounting
system default command in the XR Config mode. To disable system accounting, use the no form of this
command.
aaa accounting system default {start-stop| stop-only} {none| method}
no aaa accounting system default
Syntax Description
start-stop
stop-only
none
method
Command Default
AAA accounting is disabled.
Command Modes
XR Config mode
Command History
Release
Release 6.0
Usage Guidelines
System accounting does not use named accounting lists; you can define only the default list for system
accounting.
The default method list is automatically applied to all interfaces or lines. If no default method list is defined,
then no accounting takes place.
You can specify up to four methods in the method list.
System Security Command Reference for Cisco NCS 5000 Series Routers
6
Sends a "start accounting" notice during system bootup and a "stop accounting" notice
during system shutdown or reload.
Sends a "stop accounting" notice during system shutdown or reload.
Uses no accounting.
Method used to enable AAA system accounting. The value is one of the following
options:
• group tacacs+—Uses the list of all TACACS+ servers for accounting.
• group radius—Uses the list of all RADIUS servers for accounting.
• group named-group—Uses a named subset of TACACS+ or RADIUS servers
for accounting, as defined by the aaa group server tacacs+ or aaa group server
radius command.
Authentication, Authorization, and Accounting Commands
Modification
This command was introduced.