Usergroup - Cisco NCS 5000 Series Manual

usergroup

usergroup
To configure a user group and associate it with a set of task groups, and to enter user group configuration
mode, use the usergroup command in XR Config mode. To delete a user group, or to delete a task-group
association with the specified user group, use the no form of this command.
usergroup usergroup-name
no usergroup usergroup-name
Syntax Description
usergroup-name
Command Default
Five predefined user groups are available by default.
Command Modes
XR Config mode
Command History
Release
Release 6.0
Usage Guidelines
User groups are configured with the command parameters for a set of users, such as task groups. You can
remove specific user groups by using the no form of the usergroup command. You can remove the user group
itself by using the no form of the command without giving any parameters. Deleting a user group that is still
referenced in the system results in a warning and a rejection of the deletion.
Use the
is inherited by the parent group and forms a union of all task IDs specified in those groups. Circular inclusions
are detected and rejected. User groups cannot inherit properties from predefined groups, such as root-system
and owner-sdr.
From global configuration mode, you can display all the configured user groups. However, you cannot display
all the configured user groups in usergroup configuration mode.
Task ID
Task ID
aaa
System Security Command Reference for Cisco NCS 5000 Series Routers
106
Name of the user group. The usergroup-name argument can be only one word.
Spaces and quotation marks are not allowed.
inherit usergroup, on page 32
Authentication, Authorization, and Accounting Commands
command to copy permissions from other user groups. The user group
Operations
read, write
Modification
This command was introduced.