Group (Aaa) - Cisco NCS 5000 Series Manual

group (AAA)

group (AAA)
To add a user to a group, use the group command in username configuration mode. To remove the user from
a group, use the no form of this command.
group {cisco-support| maintenance| netadmin| operator| provisioning| retrieve| root-lr| serviceadmin|
sysadmin| group-name}
no group {cisco-support| maintenance| netadmin| operator| provisioning| retrieve| root-lr| serviceadmin|
sysadmin| group-name}
Syntax Description
cisco-support
maintenance
netadmin
operator
provisioning
retrieve
root-lr
serviceadmin
sysadmin
group-name
Command Default
None
Command Modes
Username configuration
Command History
Release
Release 6.0
System Security Command Reference for Cisco NCS 5000 Series Routers
28
Authentication, Authorization, and Accounting Commands
Adds the user to the predefined Cisco support personnel group.
Note Starting from IOS XR 6.0 release, the cisco-support group is combined
with the root-system group. This means a user who is part of the
root-system group can also access commands that are included in the
cisco-support group.
Adds the user to the predefined SCAPA maintenance group.
Adds the user to the predefined network administrators group.
Adds the user to the predefined operator group.
Adds the user to the predefined SCAPA provisioning group.
Adds the user to the predefined SCAPA retrieve group.
Adds the user to the predefined root-lr group. Only users with root-lr authority
may use this option.
Adds the user to the predefined service administrators group.
Adds the user to the predefined system administrators group.
Adds the user to a named user group that has already been defined with the
usergroup command.
Modification
This command was introduced.