Netconf-Yang Agent Ssh - Cisco NCS 5000 Series Manual

netconf-yang agent ssh

netconf-yang agent ssh
To enable netconf agent over SSH (Secure Shell) , use the netconf-yang agent ssh command in the global
configuration mode. To disable netconf, use the no form of the command.
netconf-yang agent ssh
no netconf-yang agent ssh
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
Global Configuration
Command History
Release
Release 6.0
Usage Guidelines
SSH is currently the supported transport method for Netconf.
Task ID
Task ID
config-services
Examples This example shows how to use the netconf-yang agent ssh command:
RP/0/RP0/CPU0:router (config) #
System Security Command Reference for Cisco NCS 5000 Series Routers
148
Operation
read, write
netconf-yang agent ssh
Secure Shell Commands
Modification
This command was introduced.