Cisco NCS 5000 Series Manual page 117

Authentication, Authorization, and Accounting Commands
secret
0
5
group
usergroup-name
Command Default
No usernames are defined in the system.
Command Modes
XR Config mode
System Admin Config mode
Command History
Release
Release 6.0
Release 6.2.1
Usage Guidelines
A user is never allowed to have cisco-support privileges as the only group.
Note
Use the username command to identify the user and enter username configuration mode. Password and user
group assignments can be made from either XR Config mode or username configuration submode. Permissions
(task IDs) are assigned by associating the user with one or more defined user groups.
System Security Command Reference for Cisco NCS 5000 Series Routers
username
(Optional) Enables an
MD5-secured password to be
created for the named user.
(Optional) Specifies that an
unencrypted (clear-text) password
follows. The password will be
encrypted for storage in the
configuration using an MD5
encryption algorithm.
(Optional) Specifies that an
encrypted password follows.
(Optional) Enables a named user to
be associated with a user group.
(Optional) Name of a user group as
defined with the usergroup
command.
Modification
This command was introduced.
Added support for
password-policy, as part of AAA
password security for FIPS
compliance.
109