Cisco NCS 5000 Series Manual page 37

Authentication, Authorization, and Accounting Commands
Usage Guidelines
Use the group command in username configuration mode. To access username configuration mode, use the
username, on page 108
If the group command is used in System Admin Config mode, only cisco-support keywords can be specified.
The privileges associated with the cisco-support group are now included in the root-system group. The
cisco-support group is no longer required to be used for configuration.
Task ID
Task ID
aaa
Examples The following example shows how to assign the user group operator to the user named user1:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# username user1
RP/0/RP0/CPU0:router(config-un)# group operator
command in XR Config mode.
Operations
read, write
System Security Command Reference for Cisco NCS 5000 Series Routers
group (AAA)
29