Vent socket
Interface Parameter
Outside diameter
Slip–on length
In any case the vent socket must ensure a release of pressure from the oil tank at
Oil tank inlet (tur-
Interface Parameter
bo charger)
Screw socket
Tightening torque
OIL PUMP
Oil pump inlet
The oil pump inlet must be connected directly with the oil tank outlet.
Interface Parameter
Screw socket
Tightening torque
Oil return outlet
The oil return outlet must be connected directly with the oil tank inlet.
79–00–00
Page 8
December 01 2017
BRP-Rotax
INSTALLATION MANUAL
any time. Otherwise oil could emerge into the turbo housing which conveys
through the exhaust. Formation of smoke is possible.
Value
8 mm (0.31 in.)
15 mm (0.59 in.)
m WARNING
Value
3/4–16 UNF
25 Nm (18 ft. lb)
Value
3/4–16 UNF
25 Nm (18 ft. lb)
Effectivity: 915 i A Series
Edition 0/Rev. 0