Control Elements - Rotax 915 iSc 3 A Installation Manual

Cold Cranking
Ampere
Capacity
The usage of a battery with lower capacity may have a negative impact on the starting be-
havior of the engine. Additional electrical loads, which are in some cases required by law,
may affect the battery performance during the starting process,(e.g. ACL (Anti Collision
Light), Navigation Light, Avionic).

CONTROL ELEMENTS

Switch type
Nominal voltage
Nominal current
Number of poles
Switch type
Nominal voltage
Nominal current
Number of poles
24–00–00
Page 12
December 01 2017
BRP-Rotax
INSTALLATION MANUAL
Interface
Parameter
350 A at -18 °C
(-0.4 °F) (SAE J537)
16 Ah
START POWER SWITCH
BATTERY BACKUP SWITCH
Min.
Toggle-SPST (non lockable)
28 V DC
20 A
2-pole
Toggle (but with mechanical interlock to
prevent switch on during standard
operation)
28 V DC
20 A
2-pole
Max. Nominal
Requirement
Requirement
Effectivity: 915 i A Series
Edition 0/Rev. 0