Mechanical Interfaces - Rotax 915 iSc 3 A Installation Manual

MECHANICAL INTERFACES

Throttle body Interface Parameter
Tightening torque
Cable travel
Actuating force
Max. permissible actuating force
Connection: Set screw M6x12 mm
Intercooler
Figure 6.3: Intercooler: Connection and dimensions
To attach the intercooler within the airframe design four suitable fixation points are avail-
able and M6 screws must be used.
72–60–00
Page 6
December 01 2017
BRP-Rotax
INSTALLATION MANUAL
Min.
4 Nm (3.32 lb ft.) (suitable
for flexible cable), 1.5 mm
(0.06 in.) steel rope or sin-
gle-strand wire
65 mm (2.56 in.)
7.5 N (1.69 lb ft.)
—
Max.
—
—
20 N (4.5 lb ft.)
20 N (4.5 lb ft.)
Effectivity: 915 i A Series
Edition 0/Rev. 0