System Limitations - Rotax 915 iSc 3 A Installation Manual

Figure 5.5: Rear view

SYSTEM LIMITATIONS

Operating limits Refer to latest issue of the Operators Manual.
Installation The oil system, fuel system and the cooling system are unsuitable for upside-down / in-
position verted installation of the engine.
System Limit
Static roll angle ß
The oil level should be in the upper half (between the "50%" and the "Max." mark) and
should never fall below the "Min." mark. For the oil level measuring procedure refer to the
latest version of the respective operators manual.
72–00–00
Page 6
December 01 2017
INSTALLATION MANUAL
Ignition housing
22
Water pump housing
24
Turbocharger assy.
26
Fuel pressure regulator
28
BRP-Rotax
23
25
27
Min.
Electric starter
Engine suspension frame (ring mount)
Solenoid valve (PCV)
Max.
40°
Effectivity: 915 i A Series
Edition 0/Rev. 0