Electrical Interfaces - Rotax 915 iSc 3 A Installation Manual

Connection on intercooler:
Interface Parameter
Slip-on length
See
Intercooler to
Interface Parameter
overboost valve
Slip-on length
Figure 6.5: Overboost valve
Connection on throttle body: Install the delivered hose (scope of supply) to the correct
side of the overboost valve, recheck if it fits.

ELECTRICAL INTERFACES

PCV sockets The appropriate connectors on the wiring harness as well as the corresponding sockets
on the PCV are color coded.
To avoid inappropriate behavior of the wastegate the correct linkage needs to be ensured.
72–60–00
Page 8
December 01 2017
BRP-Rotax
INSTALLATION MANUAL
Figure 6.3: Intercooler: Connection and dimensions
Min.
32 mm (1.26 in.)
Min.
18 mm (0.71 in.)
Max.
-
Max.
Effectivity: 915 i A Series
Edition 0/Rev. 0