Controlling Thermostats; Setting The Mode; Setting The Temperature; Setting The Fan Mode - 2gig Technologies Go Control 2GIG-CNTRL2 Operation & User’s Manual

Controlling Thermostats

To adjust a thermostat's settings, use the
following steps.
✓ NOTE: Several types of Z-Wave compatible
thermostats are available. Each type will
display different supported options.

Setting the Mode

1. Use the ← or → arrows on each side of the
mode display to choose between OFF, HEAT,
COOL, ENERGY SAVE HEAT, or ENERGY
SAVE COOL modes.
2. The thermostat will immediately switch to the
mode selected.

Setting the Temperature

1. Each thermostat mode (except OFF) can be set to
a temperature setpoint. Use the ↓ or ↑ arrows
to choose a temperature setpoint for the current
mode displayed.
2. The temperature setpoint is immediately
transmitted to the thermostat.

Setting the Fan Mode

If the thermostat supports Z-Wave fan control,
the fan mode selector will be displayed.
1. Use the ← or → arrows on each side of the fan
mode display to choose between MANUAL,
AUTO, MANUAL HIGH, MANUAL LOW,
AUTO HIGH, or AUTO LOW (NOTE: Only
modes supported by the thermostat will be
displayed).
2. The thermostat will set the system's fan to the
selected mode. Manual modes are displayed in
yellow to indicate that the fan will remain on
and will not be automatically controlled by the
heating or cooling system.
Basic Operation
Thermostat Settings Screen
Selecting a Mode
Use arrows to
select setpoint
Selecting a Setpoint
Selecting the Fan Mode
Use arrows to
select mode
Use arrows to
select fan mode
9