Monitor Function Of Remote Controller Switch; Calling Of Display Screen - Toshiba MMY-MAP0804HT8-E Service Manual

7-7-11. Monitor Function of Remote Controller Switch

When using a remote controller with the model name RBC-AMT32E, the following
monitor functions can be used.

Calling of display screen

<Content>
The sensor temperature or operation status of the remote controller, indoor unit, or the outdoor unit can be known
by calling up the service monitor mode from the remote controller.
[Procedure]
1
Push
to call up the service monitor mode.
The service monitor goes on, and temperature of the CODE No. 00
is firstly displayed.
2
Push the temperature setup
CODE No. to be monitored.
For displayed codes, refer to the table next page.
3
Push
Then monitor the sensor temperature or operation status of indoor
unit and the outdoor unit in the corresponding refrigerant line.
4
Pushing
Downloaded from www.Manualslib.com
+ buttons simultaneously for 4 seconds or more
button to determine the item to be monitored.
button returns the display to the normal display.
manuals search engine
buttons to select the
164
TEMP.
2
TIMER SET FAN
TIME SAVE
FILTER
RESET TEST SET CL SWING/FIX
4 3 1
ON / OFF
MODE
VENT
UNIT LOUVER