Psion Teklogix 9160 G2 User Manual page 107

Field Description
Access points which are neighbors of one or more of the clustered APs are listed in the left
Neighbors
column by SSID (Network Name). An access point which is detected as a neighbor of a cluster
member can also be a cluster member itself. Neighbors who are also cluster members are
always shown at the top of the list with a heavy bar above and include a location indicator.
The coloured bars to the right of each AP in the Neighbors list shows the signal strength for each
of the neighbor APs as detected by the cluster member whose IP address is shown at the top of
the column:
This AP (a cluster member) can be seen by the AP whose
IP address is 10.10.100.246 (at a signal strength of 54) . . .
• Dark Blue Bar - A dark blue bar and a high signal strength number (for example 50)
• Lighter Blue Bar - A lighter blue bar and a lower signal strength number (for example
• White Bar - A white bar and the number 0 indicates that a neighboring AP that was
• Light Gray Bar - A light gray bar and no signal strength number indicates a Neighbor
• Dark Gray Bar - A dark gray bar and no signal strength number indicates this is the
. . . but not by the AP whose address is 10.10.100.223
indicates good signal strength detected from the Neighbor seen by the AP whose IP
address is listed above that column.
20 or lower) indicates medium or weak signal strength from the Neighbor seen by the
AP whose IP address is listed above that column.
detected by one of the cluster members cannot be detected by the AP whose IP
address is listed above that column.
that is detected by other cluster members but not by the AP whose IP address is listed
above that column.
AP whose IP address is listed above that column (since it is not applicable to show
how well the AP can detect itself).
Table 9.2 Wireless Neighborhood Statistics
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Chapter 9: Wireless Neighborhood
Viewing Wireless Neighborhood
85