Table of Contents
Advertisement
Appendix C: Security Settings On Wireless Clients And RADIUS Server Setup
IEEE 802.1x Client Using EAP/PEAP
1. Configure the following settings on the Association tab on the Network
Properties dialog.
Network Authentication
Data Encryption
This key is provided for
me automatically
2. Configure this setting on the Authentication tab.
EAP Type
3. Click Properties to bring up the Protected EAP Properties dialog and
configure the following settings.
Validate Server Certificate
Select Authentication Method
4. Click Configure to bring up the EAP MSCHAP v2 Properties dialog.
On this dialog, disable (click to uncheck) the option to Automatically use
my Windows logon name . . . etc.
Click OK on all dialogs (starting with the EAP MSCHAP v2 Properties
dialog) to close and save your changes.
C-14
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Open
WEP
Note: An RC4 stream cipher is used to encrypt the frame body and cyclic redun-
dancy checking (CRC) of each IEEE 802.11 frame. This is the same encryp-
tion algorithm as is used for Static WEP; therefore, the data encryption
method configured on the client for this mode is WEP.
Enable (click to check) this option.
Table C.4 Association Settings
Choose Protected EAP (PEAP).
Table C.5 Authentication Settings
Disable this option (click to uncheck the box).
Note: This example assumes you are using the Built-in Authentication
server on the AP. If you are setting up EAP/PEAP on a client of an
AP that is using an external RADIUS server, you might certificate
validation and choose a certificate, depending on your infrastructure.
Choose Secured password (EAP-MSCHAP v2).
Table C.6 Protected EAP Properties Settings
Advertisement
Table of Contents
