Table of Contents
Advertisement
Appendix C: Security Settings On Wireless Clients And RADIUS Server Setup
2. Configure the 9160 G2 Wireless Gateway to use your RADIUS server
(by providing the RADIUS server IP address as part of the
"WPA/WPA2 Enterprise [RADIUS]" security mode settings).
3. Configure wireless clients to use WPA security and "Smart Card or
other Certificate" as described in this section.
4. Obtain a certificate for this client as described in "Obtaining A TLS-
EAP Certificate For A Client" on page C-34.
If you configured the 9160 G2 Wireless Gateway to use WPA/WPA2 Enterprise
(RADIUS) security mode with an external RADIUS server . . .
WPA/WPA2 Enterprise (RADIUS) Client Using EAP-TLS Certificate
Psion Teklogix 9160 G2 Wireless Gateway User Manual
C-25
Advertisement
Table of Contents
