Updating Settings - Psion Teklogix 9160 G2 User Manual

Field Description
Select the Security Mode for this VLAN. Select one of the following:
Security Mode
• None (Plain-text)
• Static WEP
• WPA Personal
Note: The Security mode you set here is specifically for this Virtual Network. Other
• Your original Internal network (configured on the Ethernet Settings page) uses the
• If a Guest network is configured, always set the security mode to "None".

15.3 Updating Settings

To update VLAN settings:
1. Navigate to the VLAN tab page.
2. Configure the VLAN settings as required.
3. Click the Update button to apply the changes.
networks continue to use the security modes already configured:
Security mode set on Security.
Table 15.1 Virtual Wireless Network Settings
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Chapter 15: Configuring VLANs
Updating Settings
159