Table of Contents
Advertisement
Appendix C: Security Settings On Wireless Clients And RADIUS Server Setup
Configuring Static WEP Security On A Client
. . . then configure WEP security on each client as follows.
Network Authentication
Data Encryption
Network Key
Key Index
C-10
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Open or Shared, depending on how you configured this option on the access point.
Note: When the Authentication Algorithm on the access point is set to Both,
clients set to either Shared or Open can associate with the AP. Clients con-
figured to use WEP in Shared mode must have a valid WEP key in order to
associate with the AP. Clients configured to use WEP as an Open system
can associate with the AP even without a valid WEP key (but a valid key will
be required to actually view and exchange data). For more information, see
Online Help on the access point.
WEP
Provide the WEP key you entered on the access point Security settings in the Transfer Key
Index position.
For example, if the Transfer Key Index on the access point is set to 1, then for the client Net-
work Key specify the WEP Key you entered as WEP Key 1 on the access point.
Set key index to indicate which of the WEP keys specified on the access point Security page
will be used to transfer data from the client back to the access point.
For example, you can set this to 1, 2, 3, or 4 if you have all four WEP keys configured on the
access point.
Table C.2 Association Settings
Choose Open or Shared
Choose WEP as the
Data Encryption mode
Enter a network key that matches
the WEP key on the access point
in the position set to the transfer key index
(and re-type to confirm)
Optionally set a different transfer key index
to send data from client back to access point
Disable auto key option
Advertisement
Table of Contents
