Table of Contents
Advertisement
7.6.1 Enabling A User Account
To enable a user account, click the checkbox next to the username and
click Enable.
A user with an account that is enabled can log on to the wireless access points in
your network as a client.
7.6.2 Disabling A User Account
To disable a user account, click the checkbox next to the username and
click Disable.
A user with an account that is disabled cannot log on to the wireless access points in
your network as a client. However, the user remains in the database and can be
enabled later as needed.
7.7 Removing A User Account
To remove a user account, click the checkbox next to the username and
click Remove.
If you think you might want to add this user back in at a later date, you might con-
sider disabling the user rather than removing the account altogether.
7.8 Backing Up And Restoring A User Database
You can save a copy of the current set of user accounts to a backup configuration
file. The backup file can be used at a later date to restore the user accounts on the AP
to the previously saved configuration.
7.8.1 Backing Up The User Database
To create a backup copy of the user accounts for this access point:
1. Click the [backup or restore the user database] link.
A File Download or Open dialog is displayed.
2. Choose the Save option on this first dialog.
This brings up a file browser.
Chapter 7: Managing User Accounts
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Enabling A User Account
69
Advertisement
Table of Contents
