Table of Contents
Advertisement
Chapter 5: Configuring Basic Settings
Review / Describe The Access Point
5.2 Review / Describe The Access Point
Field
IP Address
MAC Address
Firmware Version
48
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Description
Shows IP address assigned to this access point. This field is not editable because the IP address is
already assigned (either via DHCP, or statically through the Ethernet (wired) settings as described
in "Configuring Guest Interface Ethernet (Wired) Settings" on page 138).
Shows the MAC address of the access point.
A MAC address is a permanent, unique hardware address for any device that represents an inter-
face to the network. The MAC address is assigned by the manufacturer. You cannot change the
MAC address. It is provided here for informational purposes as a unique identifier for an interface.
The address shown here is the MAC address for the bridge (
AP is known externally to other networks.
To see MAC addresses for Guest and Internal interfaces on the AP, see the
Status, Interfaces tab.
Version information about the firmware currently installed on the access point.
As new versions of the 9160 G2 Wireless Gateway firmware become available, you can upgrade
the firmware on your access points to take advantages of new features and enhancements.
For instructions on how to upgrade the firmware, see "Upgrading The Firmware" on page 255.
Table 5.1 Basic Settings Screen Options
br0
). This is the address by which the
Advertisement
Table of Contents
