Updating Settings - Psion Teklogix 9160 G2 User Manual

Field Description
You can choose whether to use the built-in authentication server provided with the 9160 G2 Wireless
Use internal
Gateway, or you can use an external radius server.
radius server
• To use the authentication server provided with the 9160 G2 Wireless Gateway, ensure the
checkbox beside the Use internal radius server field is selected. If this option is selected, you
do not have to provide the Radius IP and Radius Key; they are automatically provided. If the
option for the internal RADIUS server is enabled, configure user accounts on the AP via the
Cluster > User Management tab. For more information, see Chapter 7: "Managing User
Accounts".
• To use an external authentication server, ensue the checkbox beside the Use internal
radius server field is deselected. If you deselect this checkbox you must supply a Radius
IP and Radius Key of the server you want to use.
Note: The RADIUS server is identified by its IP address and UDP port numbers for the dif-
ferent services it provides. On the current release of the 9160 G2 Wireless Gateway,
the RADIUS server User Datagram Protocol (UDP) ports used by the access point
are not configurable. (The 9160 G2 Wireless Gateway is hard-coded to use RADIUS
server UDP port 1812 for authentication and port 1813 for accounting.)
Enter the Radius IP in the text box. The Radius IP is the IP address of the RADIUS server.
Radius IP
(The 9160 G2 Wireless Gateway internal authentication server is 127.0.0.1.)
For information on setting up user accounts, see Chapter 7: "Managing User Accounts".
Enter the Radius Key in the text box.
Radius Key
The Radius Key is the shared secret key for the RADIUS server. The text you enter will be displayed as
" * " characters to prevent others from seeing the RADIUS key as you type.
(The 9160 G2 Wireless Gateway internal authentication server key is secret.)
This value is never sent over the network.
Enable RADIUS Click Enable RADIUS Accounting if you want to enforce authentication for WPA client stations with
Accounting user names and passwords for each station. See also Chapter 7: "Managing User Accounts".

10.3 Updating Settings

To update Security settings:
1. Navigate to the Security tab page.
2. Configure the security settings as required.
3. Click the Update button to apply the changes.
Table 10.12 WPA Enterprise Security Settings
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Chapter 10: Configuring Security

Updating Settings

115