Table of Contents
Advertisement
Approvals And Safety Summary
•
Do not operate the 9160 G2 if it has received a sharp blow, been dropped, or
otherwise damaged in any way; it should be inspected by qualified service per-
sonnel.
•
Do not disassemble the 9160 G2; it should be repaired by qualified service
personnel. Incorrect reassembly may result in electric shock or fire.
•
To reduce risk of electric shock, unplug the 9160 G2 from the outlet before
attempting any maintenance or cleaning.
•
An extension cord should not be used unless absolutely necessary. Use of
an improper extension cord could result in fire or electric shock. If an exten-
sion cord must be used, make sure:
• The plug pins on the extension cord are the same number, size, and
• The extension cord is properly wired, in good electrical condition, and
•
The 9160 G2 is designed for indoor use only; do not expose the 9160 G2 to rain or
snow.
D
N
O
O
OT
PERATE
Operating Psion Teklogix equipment where explosive gas is present may
result in an explosion.
D
N
R
O
OT
EMOVE
To avoid injury, the equipment covers and enclosures should only be
removed by qualified service personnel. Do not operate the equipment
without the covers and enclosures properly installed.
D
N
H
O
OT
OLD
To avoid discomfort due to the local heating effect of radio frequency
energy, do not touch the antenna when a 9160 G2 is transmitting.
C
ONNECTION TO
The outdoor antenna shall only be installed by Psion Teklogix
service professionals.
xviii
Psion Teklogix 9160 G2 Wireless Gateway User Manual
shape as those on the adaptor.
that the wire size is larger than 16 AWG.
I
A
E
N
N
XPLOSIVE
C
O
O
OVERS
R
PEN
A
NTENNA
O
A
UTDOOR
NTENNA
A
TMOSPHERE
E
NCLOSURES
Advertisement
Table of Contents
