Table of Contents
Advertisement
Appendix C: Security Settings On Wireless Clients And RADIUS Server Setup
1. Configure the following settings on the Association and Authentication
tabs on the Network Properties dialog.
Network Authentication
Data Encryption
2. Configure this setting on the Authentication tab.
EAP Type
Choose Protected EAP (PEAP)
3. Click Properties to bring up the Protected EAP Properties dialog and
configure the following settings.
Disable this option (click to uncheck the box).
Validate Server
Certificate
Note: This example assumes you are using the Built-in Authentication server on
Select Authentication
Choose Secured password (EAP-MSCHAP v2).
Method
Table C.12 Protected EAP Properties Settings
4. Click Configure to bring up the EAP MSCHAP v2 Properties dialog.
On this dialog, disable (click to uncheck) the option to Automatically use
my Windows logon name . . . etc. so that upon logon you will be prompted
for user name and password.
Click OK on all dialogs (starting with the EAP MSCHAP v2 Properties
dialog) to close and save your changes.
WPA/WPA2 Enterprise (RADIUS) Client Using EAP/PEAP
WPA
TKIP or AES depending on how this option is configured on the access point.
Note: When the Cipher Suite on the access point is set to Both, then TKIP
clients with a valid TKIP key and AES clients with a valid CCMP (AES)
key can associate with the access point. For more information, see
Online Help on the access point.
Table C.10 Association Settings
Table C.11 Authentication Settings
the AP. If you are setting up EAP/PEAP on a client of an AP that is using an
external RADIUS server, you might certificate validation and choose a certifi-
cate, depending on your infrastructure.
Psion Teklogix 9160 G2 Wireless Gateway User Manual
C-23
Advertisement
Table of Contents
