Psion Teklogix 9160 G2 User Manual page 125

Field Description
Transfer Key Index Select a key index from the drop-down menu. Key indexes 1 through 4 are available.
The default is 1.
The Transfer Key Index indicates which WEP key the access point will use to encrypt the data
it transmits.
Specify the length of the key by clicking one of the radio buttons:
Key Length
• 64 bits
• 128 bits
Select the key type by clicking one of the radio buttons:
Key Type
• ASCII
• Hex
Characters Required Indicates the number of characters required in the WEP key.
The number of characters required updates automatically based on how you set Key Length
and Key Type.
Table 10.6 Static WEP Security Settings
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Chapter 10: Configuring Security
Static WEP
103