Monitoring Reference (Pr. 55, Pr. 56) - Mitsubishi Electric FR-F500 Instruction Manual

4.2.23 Monitoring reference (Pr. 55, Pr. 56)

Pr. 55 "frequency monitoring reference"
Pr. 56 "current monitoring reference"
Set the frequency or current which is referenced for display when the frequency or current is selected for the
FM and AM terminals and PU level meter display.
Parameter
Factory Setting
Number
60Hz 〈 50Hz 〉
55
56 Rated output current
<Setting>
Referring to the above figures and following table, set Pr. 55 and Pr. 56:
Monitoring Reference
Monitored Data Selection
Setting Parameter
Output frequency (Hz)
Frequency monitoring
Frequency setting (Hz)
reference Pr. 55
Running speed (Pr. 37)
Output current (A)
Current monitoring
Output current peak value (A)
reference Pr. 56
Load meter (%)
Setting using Pr. 55, Pr. 56
Note: 1. The maximum pulse train output of terminal FM is 2400 pulses/second. If Pr. 55 is not adjusted,
the output of terminal FM will be filled to capacity. Therefore, adjust Pr. 55.
2. The maximum output voltage of terminal AM is 10VDC.
Setting Range
0 to 120Hz
0 to 3600A
1440 pulses/second. (terminal FM)
10VDC (terminal AM)
Full scale (PU level monitor)
Output frequency
Pr.55
Frequency setting
Running speed
PU Level Display
Pr. 53 Setting
Set to make the PU
level meter indication
to be in full-scale.
Related parameters
Pr. 37 "speed display"
Pr. 53 "PU level display data selection"
Pr. 54 "FM terminal function selection"
Pr. 158 "AM terminal function selection"
Pr. 900 "FM terminal calibration"
Pr. 901 "AM terminal calibration"
1440 pulses/second. (terminal FM)
10VDC (terminal AM)
Full scale (PU level monitor)
Output current
Pr.56
Output current peak value
Load meter
FM Terminal Function
Selection Selection
Pr. 54 Setting
1
5
6
2
11
17
Set to make the
terminal FM pulse train
output to be 1440
pulses/second.
83
PARAMETERS
AM Terminal
Function Selection
Pr. 158 Setting
1 1
5 5
6 6
2 2
11 11
17 17
Set to make the
terminal AM output
voltage to be 10V.