Ol Signal Output Timer (Pr. 157) - Mitsubishi Electric FR-F500 Instruction Manual

Hide thumbs Also See for FR-F500:
Table of Contents

Advertisement

Always perform test operation.
Stall prevention operation performed during acceleration may increase the acceleration
time.
Stall prevention operation performed during constant speed may cause sudden speed
changes.
Stall prevention operation performed during deceleration may increase the
deceleration time, increasing the deceleration distance.

4.2.45 OL signal output timer (Pr. 157)

Pr. 157 "OL signal output waiting time"
Use this parameter to set whether the overload alarm signal (OL signal) is output immediately or a preset
period of time after occurrence of an overload status.
Parameter
Factory
Number
Setting
157
0
<Setting>
Refer to the following table and set the parameter:
Pr. 157
Setting
0
Output immediately.
0.1 to 25
Output after the set time t (seconds) has elapsed.
9999
Overload alarm signal is not output.
Pr. 158
Refer to Pr. 54.
CAUTION
Setting Range
0 to 25 s, 9999
9999: No signal output
Overload status (OL output)
OL output signal
Description
131
Related parameters
Pr. 190 "RUN terminal function
selection"
Pr. 191 "SU terminal function selection"
Pr. 192 "IPF terminal function selection"
Pr. 193 "OL terminal function selection"
Pr. 194 "FU terminal function selection"
Pr. 195 "ABC terminal function selection"
Remarks
Set time t (seconds)
PARAMETERS

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents